HardWaterLab

Guide

How to tell if you have hard water

The signs, what they mean in numbers, and how to confirm it.

Short answer

White spots that come back on glasses and shower glass, a chalky crust on the showerhead and inside the kettle, and soap that lathers poorly and leaves scum are the signs of hard water. Spotting starts once water is moderately hard, above 3.5 gpg (60 mg/L); kettle scale and soap trouble are typical above 7.0 gpg (120 mg/L). To confirm, get the number: your utility’s water quality report, the ZIP lookup, or a home test.

Look up the hardness for your ZIP code

The signs, and the hardness that causes them

Every sign of hard water comes from the same two minerals, calcium and magnesium. They are left behind when water dries, they come out of solution when water is heated, and they react with soap before it can lather.

What you notice at each band of the USGS hardness scale
Bandmg/L (ppm)Grains per gallonWhat you notice
Soft0 to 600.0 to 3.5No treatment needed. Soap lathers easily and there is no scale.
Moderately hard60 to 1203.5 to 7.0Noticeable but usually tolerable. Some spotting on glassware.
Hard120 to 1807.0 to 10.5Scale in kettles and on fixtures, more soap needed, shorter appliance life.
Very hardover 180over 10.5Persistent scale, water heater efficiency loss, most households soften.
  • Spots on glasses and shower doors that look white or chalky once dry.
  • Scale in the kettle and on the showerhead: heating water drives the dissolved calcium out as calcium carbonate, the white crust.
  • Soap that will not lather, and a grey film or ring in the tub. Calcium and magnesium combine with soap into scum before any lather forms.
  • Stiff laundry and dull hair, from the same soap and mineral residue.
  • A water heater that rumbles, from scale collected at the bottom of the tank.

Things that look like hard water but are not

  • Orange or brown stains are iron, and black ones manganese. A softener handles small amounts; the softener calculator adds them to the load.
  • Blue or green stains under taps are copper, from pipes. That points to corrosive water, often soft water, not hard.
  • Spots that vinegar will not shift can be silica, which acid does not dissolve. Watts warns in its conditioner specification that silica makes water spots difficult to remove.

Reading your utility’s report

Utilities publish hardness in their annual Consumer Confidence Report. Some give total hardness as calcium carbonate, which you can read straight off. Others list calcium and magnesium as metals, and those need converting: each mg/L of calcium counts as 2.5 mg/L of hardness, and each mg/L of magnesium as 4.1.

A report listing calcium 60 mg/L and magnesium 20 mg/L
Calcium 60 mg/L × 2.497150 mg/L
Magnesium 20 mg/L × 4.11882 mg/L
Total hardness as CaCO3232 mg/L, 13.6 gpg
ClassificationVery hard

The hardness converter turns any of these into grains per gallon.

How common hard water is

Across the 3,110 counties in the public monitoring data, 55% have a median in the hard or very hard bands, and 29% are soft. The difference between states is large:

Median hardness, hardest and softest states
StateMedian mg/LMedian gpg
South Dakota40323.5
North Dakota31418.3
Arizona31018.1
Iowa31018.1
Illinois28516.6
Maine171.0
South Carolina191.1
Rhode Island211.2
Mississippi211.2
New Hampshire221.3

The figures are ambient water samples from the Water Quality Portal, not tap water. A utility may soften or blend its supply, and wells a mile apart can differ. In Maricopa County, Arizona, the median sample is 360 mg/L but a quarter are under 185 and a quarter over 621. In 93 counties a quarter of samples are soft and another quarter very hard. The county figure says what is likely; only your report or a test says what comes out of your tap. How to test water hardness at home covers strips, drop kits and the soap test.

Frequently asked questions

What are the signs of hard water?
White spots on glasses and shower doors, chalky scale in the kettle and on showerheads, soap that lathers poorly and leaves scum, stiff laundry, and a rumbling water heater.
How do I know if my water is hard without a test kit?
Read the hardness in your water utility’s annual Consumer Confidence Report, look up your ZIP code, or shake a few drops of pure liquid soap in a bottle of tap water: little lather and a cloudy look mean hard water.
What level is considered hard water?
On the USGS scale, water over 120 mg/L (7.0 gpg) is hard and over 180 mg/L (10.5 gpg) is very hard. Up to 60 mg/L (3.5 gpg) is soft.
What does hard water look like?
It looks clear from the tap. The signs appear afterwards: white chalky spots where water dries and a white crust where it is heated.
Is the white crust in my kettle from hard water?
Yes. Heating water drives dissolved calcium out as calcium carbonate, which settles as white scale. The harder the water, the faster it builds.
How do I convert calcium and magnesium on my water report to hardness?
Multiply calcium in mg/L by 2.497 and magnesium by 4.118, then add them. Calcium 60 and magnesium 20 make 232 mg/L, or 13.6 gpg.
Which states have the hardest water?
By median sample, South Dakota (403 mg/L), North Dakota (314 mg/L), Arizona (310 mg/L), Iowa (310 mg/L), Illinois (285 mg/L). The softest is Maine, at 17 mg/L.
Is hard water safe to drink?
Yes. Calcium and magnesium are not health contaminants. Hard water is a problem for pipes, appliances, soap and glass, not for drinking.

Work it out for your own project